NVELOPE vertical and horizontal cladding brackets are designed for use as a support system which are fixed to the substrate at designated vertical and horizontal separations.
NVELOPE vertical brackets are available in a standard dimension of 40-300mm and come in two sizes of Single and Double. The NVELOPE horizontal bracket is available in a standard dimension of 120 -300mm and in one size (Single). Both vertical and horizontal brackets come pre-drilled to suit the substrate required, i.e. Steel Frame, Block, Concrete, Timber etc.
The brackets are manufactured from the highest specification alloy and comply with BS EN 755 and meet the regualtions for ventilated façades in Europe.They are suitable for supporting the most straightforward to the most demanding cladding materials.
NVELOPE rail/s and fixings
NVELOPE rail/s and fixings are clipped into the brackets and adjusted for alignment and levelling before fixing permanently by drilling with stainless steel screws. To allow for expansion the relationship between the façade material and the cladding support system must be taken into account.
Nvelope manufacture a range of 'T' and 'L' profiles
NVELOPE project checklist - Static calculations.
As very façade is bespoke, Nvelope will prepare specific static calcuations and m2 prices for the intended scheme.
We have an extensive stock of cladding support system rails in all sizes for immediate delivery. For specific project requirements we are able to deliver bespoke system solutions.
Compelo Ltd Registered Office: John Carpenter House, John Carpenter Street, EC4Y 0AN, England. No: 06339167.Copyright 2020 Compelo. All rights reserved.